What is a Touch-activated faucet?

Touch-activated faucets contain touch sensors in the handle and spout that enable you to tap the faucet to start the flow of water. These faucets offer manual settings in addition to the rapid touch operation that may be accomplished with a finger, forearm, or hand.

The kitchen sink and kitchen faucet are two of the kitchen appliances that are used the most frequently in any home. A touch-activated kitchen faucet is a useful addition to any kitchen since, as we all know, things can get a bit busy and/or messy there.

Touch-activated kitchen faucets are more hygienic and handier. Continue reading for more information on touchless faucets.

Uses of a Touch-activated Faucet

Touch-activated faucets are used widely in public restrooms, especially at hotels and airports, where they lessen the spread of pathogenic microorganisms. They are also mostly present in some private homes’ kitchens and restrooms.

Advantages of Touch-activated Faucet

Touch-activated faucets have the benefit of immediately turning off after hand washing, which minimizes water waste. Touch-activated faucets eliminate the need for parents to check if kids have turned off the faucet when they are installed in a home. Additionally, the chance of a sink overflow caused by a faucet being left on accidentally or on purpose is significantly decreased by their automated shutdown function.

Cost of Touch-activated Faucets

Touch-activated faucets typically start at around $350 in price. Prices, however, may go as high as $600 or more. Best suppliers carry touch faucets, and the price may vary depending on where you get them from and which model you pick. Additionally, installation should not be too difficult because most faucets come with a full installation kit. According to Houzz, a battery pack usually comes with this.

Touch vs Touchless Faucets


You may switch the water on and off with a touch faucet by just touching it with your palm. You can find both touch and touchless faucets useful in your kitchen or bathroom. Think about the benefits and drawbacks of touch and touchless faucets when deciding which is best for your house.

If you want more control over your tap, you should choose a touch faucet. When you must contact a touch faucet to operate it rather than just waving your hand in front of it, it is less likely to be activated or deactivated by accident. Even a little portion of your hand can potentially contaminate your touch faucet, though. If you want a clean sink in your kitchen or bathroom, a touchless fixture is a superior choice.

Having particularly filthy or oily hands while entering from the garage or the garden. Your hands never have to contact anything while using touch or touchless faucet

You may use your forearm if it is a touch. If it is touchless, then the question is self-evident. Additionally, you will want to confirm that it is simple to convert your faucet to manual mode. You need your faucet to function even if the power goes out or the battery must be changed but you do not have a replacement.

One thing to keep in mind is they all need an electrical supply, either a plug-in or a battery.  So that is. The never-off faucet is also not.

Avoid worrying about your youngsters touching the faucet to turn it on and then leaving it running while you ignore the myth that touch-on faucets never turn off. Touch-activated faucets are only active for a brief period before turning off on their own.

Common Touch-activated Faucet Problems and Solutions

Our lives are meant to be made simpler by technology. But as we all know, new technology is never flawless, which may be frustrating.

Touch-activated faucets have grown in popularity during the past several years. Instead of twisting handles, these fixtures allow you to switch the water on and off by merely touching them. When cooking or cleaning, this can be more practical, hygienic (especially when handling fresh meat), and water-saving than putting your hands on handles.


As it was previously indicated, new technology is not always ideal. Here are three problems that touch faucet users frequently encounter.

Low battery

The presence of a battery pack on a touch faucet distinguishes it from a normal one. The faucet will not function as effectively as the batteries begin to run low, as you might expect. LED lights that alert you to the low battery are included on the majority of touch faucets. For directions on how to change the batteries, see the faucet’s user handbook; it should not be too difficult.

Worn-out Solenoid Valve

To turn the faucet on and off, the solenoid valve collaborates with a touch sensor. The valve may need to be adjusted or changed if it is worn out since it will not push or pull as efficiently as it should. The solenoid valve is located next to the battery pack under the sink. Electrical competence is needed to replace the solenoid. You might want to let a professional tackle this problem as you are dealing with power and water.

Low Water Flow

Similar to a regular faucet, the aerator should be checked first when there is insufficient water flow. This little metal disc within the faucet gives the stream of water air bubbles, which saves water while giving you the impression of high pressure. The aerator, however, may eventually get blocked with trash or mineral deposits. Consider taking the aerator out, soaking it in vinegar, washing it, then putting it back in.


A touch-activated faucet can use less water than a typical one and shield your hands and food from contamination. It is essentially one that you can turn on and off with a single touch. Typically, all it takes to turn the on or off the tap is a quick touch anywhere on it. That sounds rather easy.